Log in
GNSS interference sensor

Know when GNSS lies, and where it is coming from.

A sensor node for ports and shipping lanes. It watches satellite navigation signals, detects jamming and spoofing, and points at the transmitter. Scroll to fly around it.

Scroll
Loading the 3D models…
Detect

Watches every satellite, all the time

A survey-grade GNSS antenna on the mast top feeds a precision timing receiver. It logs signal strength and timing for every satellite in view. Jamming shows as signals sinking into noise. Spoofing shows as signals that disagree with each other and with the node's own clock.

  • 24/7 logging
  • jamming + spoofing
  • precision timing
Locate

Points at the source

A ring of antennas tuned to the GPS band feeds a coherent multi-channel receiver that samples them all at once, so the node measures the direction a jammer's signal arrives from.

  • direction finding
  • GPS L1 band
  • angle of arrival
Inside the node

Keeps time when GNSS is gone

Behind the door: the direction-finding receiver, the on-board computer that runs the analysis, and a high-stability clock. When jamming takes GNSS away, that clock holds the node's time, so its measurements still line up with every other node. A battery carries it through power cuts.

  • holdover clock
  • analysis on board
  • battery backup
Built for interference

Shielded where it counts

A die-cast aluminium shield, fibre for data, a filtered power entry and protected antenna entries. Every cable is treated where it enters the box, so the sensor keeps working close to the jammers it is looking for.

  • EW / EMP hardened
  • fibre data
  • filtered DC entry
Add-on · AIS

Names the ship

An AIS receiver on its own arm reads the name and position of every ship that broadcasts them, out to about 25 km. A jammer bearing that lines up with an AIS ship names the suspect. A bearing with no ship on it points to a vessel that has switched AIS off.

  • ~25 km range
  • dark-vessel cue
Add-on · Acoustic

Hears drones

An acoustic head listens for the engines of drones nearby. Matched with the RF bearing, it tells a jammer carried by a drone from one on a ship.

  • on-board classification
  • events, not audio
At sea

The same node, out at sea

Where there is no lighthouse or quay to mount on, the standard node rides in a moored buoy. The array sits on the tower. Solar panels cover the light months and a methanol fuel cell the dark ones.

  • same node as on shore
  • solar + fuel cell
  • moored buoy
Under water

Hears the hull

A hydrophone hangs 10–20 m below the buoy and listens to propellers and engines. When a ship's sound follows the jammer's track, fusion knows which hull it is.

  • hydrophone
  • blade rate + engine lines
The network

A shadow ship goes dark. Two bearings find it anyway.

A tanker with its AIS switched off jams GNSS as it passes. The node on shore and the buoy at sea each take a bearing on the jammer, and where the bearings cross, the system fixes its position and follows it as the ship moves.

No AIS position matches that spot, so the system flags a dark vessel, and the buoy's hydrophone confirms which hull it is. Every fix is logged with tamper-evident timestamps for the port, the insurer and the authorities.

Scale

From one mast to the whole Baltic

Shore nodes go on lighthouses, skerries and harbour structures; buoys fill the open sea between them. Pairs of sensors cross their bearings over the shipping lanes, so a jammer along them can be placed and tied to a ship.

The Skirnir site planner chooses the sites: it weighs tanker traffic, lanes, cables and the angle at which bearings cross.

  • 12 shore sites
  • 4 buoys
  • ~50 km radio horizon